钢结构表面处理喷砂等级标准ISO8501-1公布于1988年，包括以下四个等级：
Sa1 轻度的喷射
钢材表面应无可见的油脂和污物，并且没有附着不牢的氧化皮、铁锈和油漆涂层及其它杂质（水溶性盐和焊接残渣）。
Steel surface should be no visible grease and dirt, and there is no attachment not firm scale, rust, paint and other impurities (water soluble salt and welding residue).
Sa2 彻底的喷射处理
钢材表面应无可见油脂、污垢、氧化皮、铁锈和油漆涂层及其它杂物应尽可能除去，任何附着物均应是牢靠的。
Steel surface should be no visible oil, dirt, scale, rust and paint coating and other debris should as far as possible eliminate, any attachments should be strong.
Sa2.5 非常彻底的喷射处理
钢材表面应无可见的油脂、污垢、氧化皮、铁锈和油漆涂层附着物，任何残留痕迹应仅具点状或条纹状的轻微色斑。
Steel surface should be no visible oil, dirt, scale, rust and paint coating attachments, any markings should be only slight discoloration of dot or stripes.
Sa3 喷砂至可见清洁金属
钢材表面应无可见的油脂、污垢、氧化皮、铁锈和油漆涂层等附着物，该表面应显示均匀的金属色泽。
Steel surface should be no visible oil, dirt, scale, rust and paint coating and other attached objects, the surface should be showed homogeneous metal color.
江阴不锈钢喷砂加工厂家 http://berryessatrails.org
